一种新的应用于5G中的自适应波束赋形优化算法

5G standard uses millimeter wave band to realize communication. In order to cover more reasonable in 5G communication system, beamforming technology must be adopted. To speed up the convergence, a novel algorithm based on the SWO criterion is proposed which can be applied in millimeter wave communication. The simulation results show that compared with other beamform- ing algorithms, the proposed algorithm can achieve higher convergence speed and is more realizable.     

Stochastic polynomial optimization

ABSTRACT

This paper studies stochastic optimization problems with polynomials. We propose an optimization model with sample averages and perturbations. The Lasserre-type Moment-SOS relaxations are used to solve the sample average optimization. Properties of the optimization and its relaxations are studied. Numerical experiments are presented.     

精细注水配套工艺技术优化研究

本文通过对注水配套工艺的优化研究,有效提高奈曼油田分注率和配注合格率,提高精细注水开发效果。     

Relevance- and interface-driven clustering for visual information retrieval

Search results of spatio-temporal data are often displayed on a map, but when the number of matching search results is large, it can be time-consuming to individually examine all results, even when using methods such as filtered search to narrow the content focus. This suggests the need to aggregate results via a clustering method. However, standard unsupervised clustering algorithms like $K$-means (i) ignore relevance scores that can help with the extraction of highly relevant clusters, and (ii) do not necessarily optimize search results for purposes of visual presentation. In this article, we address both deficiencies by framing the clustering problem for search-driven user interfaces in a novel optimization framework that (i) aims to maximize the relevance of aggregated content according to cluster-based extensions of standard information retrieval metrics and (ii) defines clusters via constraints that naturally reflect interface-driven desiderata of spatial, temporal, and keyword coherence that do not require complex ad-hoc distance metric specifications as in $K$-means. After comparatively benchmarking algorithmic variants of our proposed approach – RadiCAL – in offline experiments, we undertake a user study with 24 subjects to evaluate whether RadiCAL improves human performance on visual search tasks in comparison to $K$-means clustering and a filtered search baseline. Our results show that (a) our binary partitioning search (BPS) variant of RadiCAL is fast, near-optimal, and extracts higher-relevance clusters than $K$-means, and (b) clusters optimized via RadiCAL result in faster search task completion with higher accuracy while requiring a minimum workload leading to high effectiveness, efficiency, and user satisfaction among alternatives.     

红外菲涅尔透镜的注射超声辅助成型优化

为了提升聚合物红外菲涅尔透镜的光学性能,以其表面微沟槽的成型质量为目标,提出了一种高效的注射超声辅助成型方法,并对工艺参数进行了综合质量优化。首先分析了超声振动对聚合物的加热和加压效应,设计了一套一模两腔的对比试验模具;接着以红外菲涅尔透镜的调制传递函数MTF和齿形平均高度h为优化质量目标,设计了四步骤的多目标优化流程,通过试验设计、基于BP神经网络的质量目标与注射工艺参数关系建模、基于NSGA-Ⅱ的多目标优化和试验验证进行工艺参数的综合优化。实验结果表明:该多目标优化流程具有很高的精度,MTF和h的平均预测误差MPE分别为4.16%和3.32%;注射超声辅助成型的菲涅尔透镜微沟槽具有更高的复制质量,其齿沟槽平均高度h增加了15.6%,且h值的波动量随着h值的增大而增大,MTF值受齿高h均匀性的影响大于齿高h对其的影响。     

朝凯煤矿露天台阶爆破装药结构优化应用研究

本文以神达朝凯煤矿正在开采的台阶为工程背景,针对该矿在台阶爆破过程中存在着大块率高、根底多的现象,通过改变装药结构的方式对爆破参数进行优化。实践证明,优化后大块率和根底问题的治理效果明显。     

Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit

Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively.     

Design and optimization of radioisotope sources for betavoltaic batteries

A Monte Carlo source model using PENELOPE was developed to investigate different tritiated metals in order to design a better radioisotope source for betavoltaic batteries. The source model takes into account the self‐absorption of beta particles in the source which is a major factor for an efficient source design. The average beta energy, beta flux, source power output, and source efficiency were estimated for various source thicknesses. The simulated results for titanium tritide with 0° and 90° angular distributions of beta particles were validated with experimental results. The importance of the backscattering effect due to isotropic particle emission was analyzed. The results showed that the normalized average beta energy increases with the source thickness, and it reaches peak energy depending on the density and the specific activity of the source. The beta flux and power output also increase with increasing source thickness. However, the incremental increase in beta flux and power output becomes minimal for higher thicknesses, as the source efficiency decreases significantly at higher thicknesses due to the self‐absorption effect. Thus, a saturation threshold is reached. A low‐density source material such as beryllium tritide provided a higher power output with higher efficiency. A maximum power output of approximately 4 mW/cm³ was obtained for beryllium tritide with SiC. A form factor approach was used to estimate the optimum source thickness. The optimum source thickness was found near the thickness where the peak beta particle average energy occurs.